Peristaltic pump ATO ONE doing pump

Description

ATO One Quick Start Guide
Know ATO One
ATO
One is a smart water replenishing device that requires only the sensor and the refill pump to be installed. It can be used after power-on without setting any parameters. It can be used without powering any parameters.
Standard
1 optical level sensor and 1 float level sensor. The optical level sensor is used to monitor the water level to determine whether water needs to be replenished. The float level sensor is used to prevent overflow. An optional float level sensor is available to monitor the freshwater reservoir for
water
shortage.
ATO
One
is
rich
in
status
indicators.
When
the Anti-overflow
Sensor
or
overtime,
the
refill
pump
is
not
inserted
or the freshwater reservoir is short of
water,
the
ATO
One will have an indicator light and a buzzer
alarm.
Panel
S1: Anti-overflow Sensor S2: Refill Sensor
S3: Freshwater Empty Sensor Jack
DC12V: Power DC Jack Pump: Refill Pump Jack Power: Power indicator (green) Filling: Refill indicator (blue) Alarm: Alarm indicator
(red)
Note
l
Please use the power adapter that comes with the
product.
l
The optical level sensor should be away from the air bubbles; otherwise it will be misunderstood due to interference.
l
The
optical
liquid
level
sensor
is
susceptible
to
the
influence of
dirt.
Please
pay
attention
to
erasing
the
dirt
on
the
sensor.
l
This product does not have waterproof function. Please use it in the environment of temperature 0-40 ° C and
humidity
<80%.
Warranty
We warrant your product against any defect in material and workmanship, under normal use. In the event a product is found to be defective within the warranty period of           one year, we will, at our option, repair or replace the defective product. The warranty period starts at the day of purchase. For warranty validation, a proof of purchase must       be furnished.
The followings are excluded from the warranty:
1.Improper use of the device causing malfunction;
2.The device is repaired or modified by an unauthorized person;
3.Use of non-produced material by our company i.e. pump tube;
4.Damage by disaster;
5.Improper maintenance causing damage;
6.Use of reagent or sample causing corrosion;
7.Damage by accident or over load;
8.Consumables, such as silicone tube and fuse etc.
To obtain warranty support, you may contact our local technical support. Our technical support will attempt to diagnose and correct the problem. If the problem cannot be                  rectified, our technical support will ask you to return the product. You will be asked to furnish proof of purchase to confirm that the product is still under warranty.
On Mar-06-19 at 23:16:30 PST, seller added the following information: